Epoxy warfare on my deck

16.06 in big, Boat Plans, cursing, deck, epoxy, my, on, out, sorting, the, those, urethanes, wakes, warfare

AFTER PAINTING TWO BOATS with twin-pack polyurethane paint, I thought I knew all about polyester urethanes. I was wrong.

After I had finished the second boat, the surveyor came along. Tap, tap, tap, he went, all over the hull and decks of my sweet little 22-foot Santana.

He approached me with a long face. “Bad news,” he said, “your deck is delaminating.”

“What?” I cried. “Impossible. I’ve just been all over it. Sanded it. Painted it. There was nothing wrong with it.”

“Come and listen,” he said. He tapped the deck and it made that sickening dull thud, instead of a nice bright ring.

“Omigod,” I said.

There was no doubt about it. Something was badly amiss. We pondered it together, and eventually I decided there was nothing to lose.

I took a sharp knife and cut into the deck. I pulled back a strip. It was all paint. The deck underneath was as solid as ever.

“The paint hasn’t stuck,” the surveyor said. “How did you do this?”

I told him I’d sanded down the old deck paint. I applied a coat of Interlux epoxy primer. Then, having run out of that particular paint on the weekend, I grabbed some more epoxy primer from my nearest Ace Hardware store, and applied that. Before it cured, I sprinkled sand over it, 30-grit sand from a local builder’s yard. When the epoxy dried, I brushed off the excess sand lying on top with a soft brush.

Then I painted on two coats of Interlux twin-pack polyurethane. The result was magnificent. Better than new. Much better. Until the surveyor came along.

We poked around the deck some more and found that we could peel the new deck off by hand. Large chunks of  it came away as we togged. The epoxy and polyurethane and sand had formed a thick pliable skin — but it was not attached to the old deck. Underneath this skin, and on top of the old deck, was a sweet-smelling layer of some kind of liquid chemical.

“Aha,” said the surveyor, who was a smart man. “Incompatible epoxies.” He explained that the Interlux epoxy and the Ace Hardware epoxy had not liked each other. They had not got on well together at all. One of the other had revolted and formed this liquid layer that had prevented the top layers from sticking to the deck.

So I pulled off the new layer of deck paint like you’d peel the skin off a banana, scrubbed the whole deck down with acetone, and started again, this time with two epoxy coats from Interlux. And this time it worked. But it was a hard way to learn that different epoxies hate each other so much. I always thought epoxy was epoxy. Anyway, for someone who thought he knew all about twin-pack polyurethane, it was a humbling lesson.

Today’s Thought

Good painting is like good cooking: it can be tasted, but not explained.

— Vlaminck, On Painting

Tailpiece

“Johnny, who was the roundest knight at the Round Table of King Arthur?”

“Sir Cumference, sir.”

“Very good. And how did he achieve his great size?”

“From too much pi, sir.”

Read more

Scientific Anglers Wavelength Titan Prepare for Launch

07.44 in anglers, Boat Plans, burkheimer, for, i, launch, love, my, prepare, scientific, titan, wavelength, why

When you hear the word "Titan" do you think about fly lines? Or Saturns largest moon Titan, Or the Titan Missile that was in use for more than 45 years that included early manned space flights known as project Gemini, Or the Greek Mythology were the Titans are giant deities of incredible strength who ruled the legendary Golden Age. The common denominator of the word Titan is clearly defined by size, strength and power. Can a fly line really be compared to such greatness!

Wavelength Titan

Wavelength replaces the Textured series. A short history...first came Sharkskin than Textured. Textured was a softened up version of Sharkskin. In 2014 Sharkskin was refined into Sharkwave. For 2016 Textured gets refined into Wavelength. Within the Wavelength Series you will find MPX, Titan, Trout, Nymph/indicator, Grand Slam and Tarpon. For the purpose of this article I am just going to focus on the Wavelength Titan and Sonar Titan sinking lines.

Wavelength Titan

Titan

Titan came out a few years back after all the hype of the Sharkskin/Textured lines had come and gone. I said it as soon as I fished with the Titan that this was probably the best ever of the textured lines that I have ever fished (and Ive fished them all) but unfortunately no one will be willing to try it after so many mixed reviews regarding Sharkskin. I liked the Textured Titan and continued to use it despite the hazing I took for fishing with a textured line. After a couple years it gradually grew a steady following. In that period I found several other dedicated users with similar opinions about the line. S/A noticed and decided to lock in this taper and expand on it. Look today and you will find this specific "Titan" taper in the Wavelength, Mastery and Sonar Series of lines. I think that says something for it. Its here to stay. What makes this particular taper successful is while in general it is a bumped up shooting head type of line that provides easy turnover of large flies it also incorporates enough rear taper to make it far more friendly and versatile than other shooting head lines. More versatile in the way of easier mending, more flexible pickup / cast positions, better shoot-ability with its textured surface and just more friendly fish-ability.

Conquered with Titan

In general most shooting lines are very straight forward, you strip in to the head, make your cast, strip back in to head and repeat. This is great when all youre doing is bombing distance cast. But the problem with this is what happens when you get that surface strike and go to set the hook...Swing and a miss! You want to get that fly back on the target as quick as possible but your standard shooting head line has you scrambling to strip back to the head to make another cast. Your traditional shooting head line is in the thin running line section and cannot transfer the energy properly to get the fly back to where the strike occurred. You struck out! Titan gives you that little added benefit of getting your fly back and getting the hit with a little bit of added rear taper that allows for a more flexible pick up point. Titan also requires less energy to lift off the water due to its reduced friction from the textured surface allowing you to utilize that energy into the backcast for increased rod load enabling an easier long forward re-cast back to the specific target. I have witnessed and done this time and time again and the benefit is clearly evident especially when you are target specific fishing.

The best uses I have found for this line is predator fishing such as bass, pike and musky. It can be a good carp line if your bugs are on the big or weighted side such as in the picture above. That is a great lakes carp caught with a weighted craw pattern. Titan was perfect for that catch. It can also be a great trout streamer line both from a boat or wading. Easily handles nymph/indi fishing from a boat too. Im sure you could find other uses as well. Tell us what you use it for in our comments.

In my words Titan is a modern powerful big fly, easy turnover taper that excels at shooting distance and yet retains some handling properties of a bumped up general purpose fly line.

Specific Textured Characteristics - The Good, Bad and Myth!
Titan is a textured line and while texturing has some great characteristics it has also has some bad rap mostly originating from the original Sharkskin Series of lines. Let me address the good, bad and mostly myth about these lines.

Tamed with Titan!

They will cut your hands! While the original sharkskin was very roughly textured the Wavelength lines are no were near as sharply textured as sharkskin was. Is the textured surface noticeable, sure! My take on this is you are going to be handling and stripping line all day than you really need to wear some stripping gloves no matter what line you fish with whether it smooth or textured. If you cant stand gloves than get some Stripping Guards by Buff. The payoff of gloves or stripping guards with any fly line is better strips and no line burns.

Noisy in the guides! Again nothing compared to the original sharkskin lines. Do they make a little noise, yes! Is it a problem, No! Its actually a benefit that I will explain next.

Less friction! Textured lines strip easier, haul easier and lift off the water easier. I would question anybody who wants to make an argument about this! I very much appreciate less friction after long days of repeated target casting.

Higher floating! Not only is this a great feature in itself but also contributes to easier lift from the water.

Shoots farther! I want to mention that not only it this noticeable with a new line right out of a package but textured lines continue to shoot great day after day and year after year. My original Textured Titan line is 5 plus years old with countless hours of use and still shoots and performs great!

Heat resistant! Im dont know if this has anything to do with the textured surface but I noticed this past summer in mid day high temps when a couple of my OTHER lines where reaching melting point and NOT behaving well while wilting in the mid day heat but my Titan continued on shooting with no trouble at all. Likewise I have fished it right down to freezing temps and still handles good.

The sinking Sonar Titans have arrived!

New for 2016 for Scientific Anglers is Sonar Series. Sonar Series indicates any premium S/A lines that sink!
Three Titan options here that I want to spend some time on. First understand that all Sonar Titan lines have a textured surface. This alone clearly separates them from the other Sonar Series lines which have a smooth surface. Personally I think the next 3 lines I describe have a significant place in the future of sinking lines due to the popular taper design and the benefit of the textured surface.


Sonar Titan Clear Tip
Think powerful clear streamer tip!

Sonar Titan Clear Tip is a weight bumped, powerful taper for easy turnover of big flies, three color for easy length determination, textured for easy pick up and long distance shooting ability and formulated to suit most temperate environments.

Sonar Titan Intermediate

Many Streamer Anglers are discovering the benefit of going all in with full intermediate lines. Getting the running line under the surface improves your connection to the fly and allows for truer swimming action of streamers.

Sonar Titan Int/Sink 3/Sink 5
Triple Density Sinking fly line! I am already hearing major buzz following this line. Its starts with an intermediate running line section that seamlessly transforms into a type 3 sinking mid section that flows into a type 5 sinking Titan tapered head section of line. Triple Density, full sinking, powerful Titan taper, braided core, made for temperate environments and textured for reduced friction allowing for easier pickups and longer cast. Streamer anglers even if youre not a textured line fan you might ought pay attention to this one. We could easily be looking at a game changer!

Triple Density

From the very first Sharkskin I realized that there was some benefits to textured lines. It just took a few years to bring out those qualities. I continue to use and test new lines all the time and in the past couple of years I find myself comparing lines to the Titan. That says a lot. Titan is not a line for every purpose or everyone but mark my words, "Textured lines like Titan are here to stay!"

Greg Darling 

Gorge Fly Shop Internet Sales Manager | Product Specialist

"Fly Fish the World with Us"

Read more

Monster Arapaima in the Deep Jungle of Guyana

03.01 in 2015, arapaima, bend, benefit, Boat Plans, day, deep, experience, guyana, in, jungle, monster, my, of, oregon, spey, the, your

Some anglers like to fish the same water for many years. Each time you fish there it becomes like visiting an old friend, reflecting on special days and fish from the past. Other anglers look beyond what they know and where they have been for new angling challenges and adventure. That is exactly what clients Dave Farley and Tim Youngkin had in mind when they heard about fishing for Arapaima in Guyana from my article in the Gorge Fly Shop Newsletter in the spring of 2013.

It is a very limited fishing season in Guyana, for 3 weeks in the spring and 3 weeks in the fall, with only 4 anglers per week. Outside of that the fishing for this species is illegal in these protected waters. The next available week was in November 2014. They said we are in and put their money down. There was a lot of preparation on their part with fly tying and buying as well as a lot of new heavy duty 65lb core Rio Leviathan lines. The rest of them break like trout tippet. As there is a weight limit on the charter flight into the jungle, strategic packing and planning was essential. This part was unrealistic but the reality of the situation. This is not a full service fishing lodge but the remote jungle Rewa Eco lodge reached by charter flight and a boat trip.  The money they get from this tourism helps the tribe be self sustaining without selling of logging and mining rights that would destroy this rare place.

After fishing the water nearby the lodge the guides determined there were more fish up river and further into the jungle. So they left the comforts of the lodge for a hammock in the jungle under an open shelter. They spent days up there without creature comforts. It was extremely rustic but in the middle of huge Arapaima that would eat the fly. There was also a scientist along that had been studying those ancient fish for years. They both had some ass kicking action as well as landing fish. The two photos included show a fish landed by Dave and one by Tim. The largest was well over 200 lbs.

So get out of bed….put down the remote….get off the computer and make a plan to get on the water!

Jerry Swanson
Fish Head Expeditions, LLC
jerry@fishheadexpeditions.com
503-539-1451

"Fly Fish the World with Us"

Read more

The truth about offshore sailing

13.25 in about, Boat Plans, common, deck, epoxy, fog, in, my, offshore, on, sailing, sense, the, truth, use, warfare

IT’S HARD TO EXPLAIN to a landlubber what offshore sailing is all about. But William G. Homewood found a way to do it, after he had raced from Newport, Rhode Island, to Bermuda and back in a Ranger 26.

This is his description, as recorded in Richard Henderson’s book, Choice Yacht Designs:

“First, at home, you should go into the bedroom fully dressed and pour a bucket of water over your head. Put on your foul-weather gear and harness.  Prop up one side of the bed to an angle of 20 degrees, then pour a bucket of water over the pillow and bedding.

“Engage the services of a fork-lift (and operator) who will lift one corner of your house up into the air six feet and then let it drop down with a bang.  He should do this all night long, intermittently, without warning. Now, go to bed.

“After one hour of sleep it will be time to get out of bed, open the sliding door to the balcony, and peer out (checking the sails). At this moment a friend, well hidden, should throw a bucket of water onto the back of your head. Your jacket hood must be in the off position, as this will allow the water to run down your neck. . . .  As  you turn to go back into the bedroom, another well-hidden friend should club you over the head with a two-by-four. This simulates head blows from the  bulkheads. . . .”

There’s more that a landlubber needs to know, of course. You should fill your rubber boots with water and you should remember to throw up only on the lee side of the cockpit. You should preferably practice walking with one leg shorter than the other so as to remain upright on the slanted deck and you should develop arms like a gorilla’s so you can hang on to the handholds when a wave tries to wash you overboard.

You should also practice holding your bladder for at least eight hours because it’s impossible to get a hand on the outlet from your urinary tract when you’ve got a whole bunch of layers of clothing and waterproof pants on.

As for cheerful, sustaining hot meals — um, well, sorry feller. Ain’t gonna happen.

Today’s Thought

We have all sinned and come short of the glory of making ourselves as comfortable as we easily might have done.

— Samuel Butler the Younger, The Way of All Flesh

Tailpiece

Adolescence is a period of rapid change. Between the ages of 12 and 17, for instance, a parent can age as much as 20 years.

(Drop by every Monday, Wednesday, Friday for a new Mainly about Boats column.)

Read more

Spey Day 2015 My Experience Your Benefit Bend Oregon

09.59 in 2015, bend, benefit, Boat Plans, christmas, day, experience, house, ikari, island, my, oregon, spey, your

Got the email from Erik of Anglers Rendezvous (our Sage, Redington and Rio reps) that our annual Farbank Mini Spey day was going down on March 22nd, 2015 in Bend, Oregon, a short three hours drive from my hometown of Hood River. I thought, what a great excuse to get away and spend six hours casting Spey and Switch rods until my hands had to be pried from the cork handles...Like a warrior whos held a sword for hours during battle and his hands wont let go.

Spey Day - Bend Oregon

Sage and Redington Spey & Switch rods
patiently wait their turn to perform.

If this years Spey day is anything like last years, I am going to thoroughly enjoy it. Its not too often that a guy has the chance to cast multiple Spey and switch rods side by side, for an instantaneous direct comparison. To really get a feel for the difference, casting different models, lengths and tapers side by side is by far the best method of telling the differences. Honestly, not only is it fun for me to spend the 6 hours casting all the rods but it translates into the confident conversations that I have on a daily basis with customers who call the shop or drop in looking for guidance in making their first spey rod purchase or their tenth.

From a customers standpoint, there is nothing like talking to someone on the phone that has actually cast or fished with the rod that they are interested in. From a shops standpoint there is nothing like having an employee who has actually cast or fished with the rod that the customer is interested in. First hand knowledge of equipment reeks through your conversation over the phone. I hate talking to someone that seems to be reading right out of the catalog trying to sell me something. It doesnt take too long to realize when this is happening.

Google or YouTube anything today and in a matter of milliseconds you have years of information and opinions at your fingertips. This is a good thing and it can be a bad thing. Good because you can do research without the pressure of a used car salesman breathing down your neck paid by commission. Bad because you can do your research...too much research...research overload, so much to the point you cant make a decision one way or another. Youre now more confused than when you first started. If youre reading this and are thinking of making a Spey or Switch rod purchase, with all due respect, do some research, and pick just a couple of fly shops that actually fish with spey rods and youre confident with, give them a call and get dialed in. I have had numerous conversations with customers who have over researched and finally, out of desperation reach out to us. I once had a customer (if this is you, I didnt mention any names) straight up, within the first few seconds of our conversation confessed that he had been researching the equipment he was interested in for months and that he had literally called nearly every fly shop in the United States and now was so frustrated because he kept getting conflicting intel. I totally understood what he was saying and I respectfully said to him...that he had become so saturated with information he couldnt make a decision because most of the folks he talked to contradicted the previous guy he called. I politely said to him that he needed to take a breath and pick a couple of shops, who actually use spey rods, and start to trust somebody. He agreed with my statement and confessed that he was exhausted from all the research and he thanked me for being so honest with him. I could actually feel the tension in his voice subside as I told him this.


In short hed become so overloaded with different personal preferences from so many shops that he couldnt choose. Shop employees where giving him advise on their casting preferences but neglecting to ask him about his. He was transitioning into the two handed world from single hand rod experience. So I was able to gather enough info from him and his background with a single hand rod that I could recommend a rod suitable to the casting style he was already used to, which made for a smoother transition for him. The equipment he was interested in was expensive and he wanted the confidence that he was making the right choice for his investment. He didnt have a local shop that he could test drive the equipment or talk to anyone who even used a spey rod.

Spey Rods and Reels stacked like chord wood!
OK, where do I start!

There are many reasons why you need to take a deep breath, sit back, relax a bit, and approach the spey/switch scene with a bit of trust. I say that assuming from this point on you will take my advice and use a shop that actually lives and breaths to spey fish and knows the equipment.

There are a number of variables that will help us get you dialed in. For instance, your casting style, are you on the aggressive side or are you a bit more laid back and patient, what size of a river you fish, what style or technique will you want to use and much more. I cannot give you a true diagnosis of the correct rod you should choose, by just considering my casting style. That would be like going to the doctor because youre ill and the Doctor diagnoses you with his symptoms. Doesnt make sense, does it? I need to gather as much information from you to help you make the right choice.






For example, I once set up a petite woman with a Sage One 7116-4 (116" 7 weight) Switch rod and a Rio Skagit Max Short head due to the fact that she was small, the shorter switch rod and head fit her perfectly. The standard, go to, introduction to Spey rods, Sage One 7136-4 (136" 7 weight) was too big for her. Once she took the Switch rod outfit to the river, it didnt take her long to fall in love with it. I try my best to get as much information from the customer and their casting style before recommending which rods would suit them. If they have no experience at all, either with a single hand rod or a two hander, my default recommendation is typically a fast action rod such as the Sage One. Theres a reason for this. Typically a fast action rod is much more forgiving than an ultra-fast action rod, were your timing is somewhat critical, or a slow action rod because most people, honestly dont have the patience to wait for a deep flexing rod to load up before they start their forward stroke. When casting an ultra fast rod, such as the Sage Method, if your stroke is on its "A" game the rod will let you know how awesome you are by producing blistering line speed with little effort. BUT if youre having a "B" day, youre gonna struggle and you may not like the Method so much. The Sage One is the perfect go to rod for most folks. Its easy going for a somewhat laid back caster, super smooth and yet still has the power if you give it a little more umph on your bottom hand when you need to. Now there are other rods that have a fast action that would suit the needs of most folks, Im just using the Sage One as an example, because in the Sage lineup of rods, it is my go to "comfort food" rod. Its an amazing tool. I wouldnt know these intimate details of the Sage One if I didnt have a personal relationship with the rod. The Method is an awesome rod, no joke, its awesome...for the guy who loves an ultra fast rod...not so awesome for the guy who likes a more traditional full flex rod.


In the six hours I spent casting, I cast 4 weight switch rods to 15 10 weight spey rods and everything in between. Spending considerable amounts of time on each. If you want to test your casting skills grab a 4 wt switch rod and immediately after casting that for 20 minutes grab the 15 10 weight Sage Method, then go straight for the Sage Accel 7126-4 aka "Mr. Wiggles" and just see if it doesnt take some adjusting before you get your stroke back. This is why I go to these "Spey Days". To be able to grab rods and cast them side by side for an accurate instant comparison is priceless for the customer who doesnt have that opportunity or have a local shop that they can do so themselves. My experience equals your benefit. You, the consumer benefits from my personal time spent with each of these rods. Now, if you call the shop and ask me about a rod that I have never cast, I will tell you that I have never cast that one...yet. I will be honest with you and tell you that I havent lined that rod up yet. I can still describe the action of the rod, maybe even talk to you about the taper, give you a great line recommendation but this conversation wont have the passion in it compared to the rod I have actually went out and spent time on the water with or even personally owned. You can tell when someone has a bit of passion about something.


Ill end with this. The "Spey Day" was on one of my days off...just sayin...

Low and Clear

This beautiful Steelhead was caught on a Sage One 6126-4 in low clear water conditions. When water is low and clear, lighter rods, lighter sink tips or no sink tips, and natural colored flies are a good choice to improve your odds in landing the prize...

Remember, if you can’t find it at the Gorge Fly Shop, you don’t need it!

Gorge Fly Shop
John Garrett | Product Specialist
541.386.6977

"Fly Fish the World with Us"

Read more

Falling down below

06.53 in a, anchor, below, Boat Plans, deck, down, epoxy, falling, lost, my, on, recovering, warfare

THE ESTEEMED early-20th-century boat designer William Atkin once designed for himself a 29-foot wooden sloop that was remarkable in my eyes for one particular thing — she had no companionway steps.

“If you drop down into the cabin of Ben Bow (and you will have to drop down because there is no companion ladder) you will find the bunks aft, then the galley, then two pipe berths, with a water closet near the foot of the mast,” Atkin wrote in his book Of Yachts and Men.

“As I have just mentioned, in Ben Bow we do not have a companion ladder. Sort of a man’s boat she is. We are not yet so old or stiff as to be unequal to scrambling in or out her cabin.

“Just two steps does it, one being a projection shod with a bit of brass on the bulkhead, the second being a corner of the starboard locker top. And so we are rid of a ladder, a piece of furniture which is always, I feel, too much in the way.

“The ladies? Well, God bless ’em, we might lower them away on the end of a rope. Somehow women generally do not love boats. Think they are a little jealous of them, just a little. Or perhaps their natures are too much alike . . . uncertain sort’a, and feminine, and — well I suppose I shall have to admit it — lovely.

“The cabin has among other features, one wide berth on the port side set high from the floor and with large lockers underneath. Even our old friend Abel Brown, who tells racy tales about berths, cannot quarrel much with the dimensions of this one; ‘big enough for perfect comfort under any situation,’ he might have remarked.”

It was surely a strange aberration that made Atkin omit a companionway ladder on his own boat. It wasn’t something he normally did on the hundreds of other boats he designed. It’s true that the darned ladder does take up precious space on a small boat, but if you’re a man who wants to share the pleasure of sailing with a wife or lady friend it is surely an act of gallantry to provide decent access from the cabin to the cockpit. Sort of like flinging your cloak into a puddle, so Her Majesty can keep her dainty slippers dry. Only more permanent. And a definite investment in marital bliss.

Today’s Thought

The hardest step is that over the threshold.

— James Howell,  Proverbs. No. 7

Tailpiece

Groucho Marx once opened a drawer by mistake in a friend’s home. He found a Colt automatic pistol surrounded by several small pearl-handled revolvers.

“My God,” he said, “This gat has had gittens.”

Read more

Why I Love my Burkheimer

05.41 in 14th, Boat Plans, burkheimer, columbia, december, fishing, gorge, i, love, my, report, why

C.F. Burkheimer 7134-4

Spey fishing is a craft. It is alive and evolving, just as art, music and even yoga. 

Like many North-westerners, I started out fly fishing for trout and rather quickly evolved from single hand casting to spey casting. As the progression moves on, we evolve from learning to cast to learning to cast effortlessly. At the same time, we strive to find the best rod, reel and line to fit our personal casting style. Many of us go from fast rods to slower rods, cheap rods to expensive rods, many rods to just a few cherished rods. I feel that if this evolution happens over a long enough time frame that many steelheaders will land with a Burkheimer as the centerpiece of their collection. Some guys just pick a rod and then use it forever, but I am a gear junky, and my current position at a fly shop allows me to push it to the limit if I choose. I am constantly striving to improve; improve my cast, my rods, reels, lines, flies, presentations, gear, attitude and the quality of my fishing time.

This past summer, I began to feel that I had been spey fishing long enough that it I could finally get a Burkheimer. I wouldn’t say that I deserved a Burkheimer or that I had earned a Burkheimer, but the time has come for me to get one. I have now, over thirteen years of spey fishing, owned, or at least fished rods from every rod manufacturer out there. It now occurs to me that they were all just practice rods, learning tools so that when the time came, I could wield the Burkie with the respect that it deserves. I mean, you don’t just give a teenager a new car. Not only does the teen have to learn to drive it properly, he needs to learn how to care for, maintain, and most importantly, respect it before being given the keys.

My friend E bought his first Burkie last winter. I got to cast it just for one run and was absolutely in love with it. The 7119-4 is a beautiful switch rod, perfect for the Hood River in the winter. E fished it for a few months and then one day I noticed he was fishing his Echo again. I asked why he would sell the nicest rod he had ever cast and he said that it was partly because he was afraid that he would break it, but mostly that the rod was too nice for him. He felt that he was not worthy of having such a beautiful stick. At least he recognized it early on, and the time will come for him to buy another some day.

C.F. Burkheimer makes many different models to choose from. I chose the 7134-4. The 13’4” 7wt is a great year-round stick that has a deeper load than the 7127-4 (my second choice). This rod is perfect for Skagit casting and winter steelhead. Not that the 7127-4 isn’t great, but I prefer the deeper load and slower action of this rod compared to the quicker action of the 7127-4. I fished a few different Scandi style lines on the Deschutes, including an Airflo Rage Comapact 450, a RIO Scandi Versitip #7 and a Scientific Anglers UST Scandi 480. All of those lines were a good match to the rod and made casting nearly effortless.

While I thoroughly enjoyed fishing the Scandi lines, I am ready for the winter chrome. My rod is now loaded up with the new Airflo Skagit Compact G2, 540 grain Skagit Head and it is money! Nice, easy, steady strokes result in long, tight loops with minimal effort. Matching this line and rod makes this one of the nicest casting setups I have ever touched.

One of the nicest you ask? I thought that the Burkheimer was the end-all be-all rod, the one rod to rule them all? Well, the Sage ONE 7136-4 is an amazing rod that casts like a dream, so are the Winston BIII TH 7133-4 and the G. Loomis NRX 13’ 7/8. There is a lot of power loaded into this Burkheimer, but it takes a slow, steady stroke to unleash it, and I am still months from pushing the rod to its limits to find the perfect stroke, and then reigning in that cast to perfection. While I would give the edge in pure ease of casting to the ONE (it’s also lighter in weight), the Burkie wins in my book as the best overall rod. It’s the attention to detail, the finish work, the paint job, the hardware, and of course, the mystique that all push the Burkie into a solid first place finish.

The Burkheimer 7134-4 has a similar cast and load to the Winston BIII-TH 7133-4 in my opinion. It has a deep load that responds quickly when power is applied to the forward stroke. While the rod is very forgiving, it still lets you know when you’ve done it right. I believe this rod has a little more flex in the bottom end and has more power in the forward stroke, but it’s pretty darn similar in my opinion. The ONE and the NRX are both faster and a little bit lighter, but the overall weight is not noticeable to me when standing knee deep in the river.

The one place that I really do notice a difference is in the cork. I like a thin grip that is comfortable in hand and beautiful to look at. Burkies have the nicest cork on the market, both in the quality of the cork and the shape of the handle. This goes a long ways for me, as holding onto a rod for 8 hours a day is uncomfortable with some cork handles on the market. This one is easy to hold and helps to create a very relaxed grip. A relaxed grip leads to a relaxed cast, which is what I am searching for in a good rod.

Am I putting my Burkheimer up on a pedestal? It is just a fishing rod. It’s probably much like any other rod from an outsider’s perspective. I know this, but I feel that if any piece of gear in the fly fishing world should be put on a pedestal, it should be a Burkheimer spey rod.

About buying a Burkheimer: C.F. Burkheimer Fly Rods. Build your custom rod in our store

We forward order and Stock a few select Burkheimers: Check for in-stock Burkheimers





Andrew Perrault
Gorge Fly Shop | Product Specialist
541.386.6977

"Fly Fish the World with Us"

Read more